- Online store
- >
- Lubricants & other race supplies
- >
- Millers CRX 75w90 Transmission oil
Millers CRX 75w90 Transmission oil
SKU:
£0.00
Unavailable
per item
Blah blah
DescriptionCompetition fully synthetic transmission oil. A blend of fully synthetic base oils incorporating new “Nano Technology” additive chemistry to significantly reduce internal friction and power losses.
ApplicationDesigned for the lubrication of competition gearboxes. Manual transmissions, synchromesh, non-synchromesh, sequential gearboxes, transfer gearboxes, transaxles and hypoid differentials without limited slip which require API GL4 or GL5 performance. Recommended for modern transmissions where fully synthetic oil is specified, especially for high performance road and track day applications. Hewland, Xtrac, Glebe Transmissions, ZF, Tran X, Elite Transmissions. Note: Does not contain friction modifiers. For plate type Limited Slip differentials use CRX LS 75w90 NT
User Benefits
SAE Viscosity75w90
Specific Gravity (at 15°C)0.875
Kinematic Viscosity (at 100°C, cSt)16.5
Kinematic Viscosity (at 40°C, cSt)106.8
Viscosity Index167
Flash Point (°C)>200
Brookfield Viscosity at -40 °C, m Pas88000
ApplicationDesigned for the lubrication of competition gearboxes. Manual transmissions, synchromesh, non-synchromesh, sequential gearboxes, transfer gearboxes, transaxles and hypoid differentials without limited slip which require API GL4 or GL5 performance. Recommended for modern transmissions where fully synthetic oil is specified, especially for high performance road and track day applications. Hewland, Xtrac, Glebe Transmissions, ZF, Tran X, Elite Transmissions. Note: Does not contain friction modifiers. For plate type Limited Slip differentials use CRX LS 75w90 NT
User Benefits
- Exceptional cold flow properties for easier gear changes.
- Fast lubrication flow to component extremes on start up
- Very good oxidation resistance and superior thermal stability. Low friction/ low drag formulation to help reduce operating temperatures.
- High film strength for maximum component protection. Significantly reduces friction, temperature, wear and minimises power loss.
SAE Viscosity75w90
Specific Gravity (at 15°C)0.875
Kinematic Viscosity (at 100°C, cSt)16.5
Kinematic Viscosity (at 40°C, cSt)106.8
Viscosity Index167
Flash Point (°C)>200
Brookfield Viscosity at -40 °C, m Pas88000